Valve Cover Gasket Set Replacement for Toyota Scion 1.5L 1NZ-FE 2000-2019 – Replaces VS50624R 11213-21011 – Compatible with Prius Yaris Echo xA xB – VIN B K A

Product Technical Specifications Engine Application: Toyota / Scion 1.5L DOHC 16-Valve 1NZ-FE / 1NZ-FXE OEM References: 11213-21011, 11213-21010, 126603335, VS50624R Gasket Material: Pre-formed PermaDry Molded Rubber Kit Contents: Valve Cover Gasket Cylinder Head Type: DOHC (Double Overhead Cam) Valves per Engine: 16 Installation: Dry installation, no RTV required on gasket surfaces Complete Verified Fitment Matrix (Engine, VIN Referenced) Compatible with Toyota Prius 2001-2009 – 1.5L 1NZ-FXE (VIN B) – DOHC 16V – FWD (Full Hybrid) Compatible with Toyota Prius C 2012-2019 – 1.5L 1NZ-FXE (VIN B) – DOHC 16V – FWD Compatible with Toyota Yaris 2006-2019 – 1.5L 1NZ-FE (VIN A, K) – DOHC 16V – FWD Compatible with Toyota Echo 2000-2005 – 1.5L 1NZ-FE (VIN B) – DOHC 16V – FWD Compatible with Scion xA 2004-2006 – 1.5L 1NZ-FE (VIN A) – DOHC 16V – FWD Compatible with Scion xB 2004-2006 – 1.5L 1NZ-FE (VIN A) – DOHC 16V – FWD Objective Facts for Professionals This Ortopia valve cover gasket is built to replicate the sealing performance of OEM 11213-21011 and Fel-Pro VS 50624 R for Toyota 1.5L 1NZ-FE and 1NZ-FXE DOHC engines. Pre-formed molded rubber construction matches the OE profile, ensuring proper compression seal without RTV. This gasket fits the 1.5L engine family exclusively—it does NOT fit the 1.8L 2ZR-FXE found in 2010+ Prius models. Verify your VIN 8th digit and engine displacement before installation. The result is a leak-free seal and restored engine cleanliness. No overclaim; just a correctly specified gasket replacement.

• Same Spec, Smarter Spend – This Ortopia valve cover gasket set is built to the same sealing specification as OE 11213-21011 / Fel-Pro VS 50624 R. Designed exclusively for Toyota and Scion 1.5L DOHC 16-valve 1NZ-FE and 1NZ-FXE engines. Pre-formed PermaDry molded rubber construction ensures a leak-free seal without RTV. No downgraded materials, no shortcuts. The difference? You pay for the engineering, not the dealership markup.
• Problem & Solution – Fixes oil leaks from valve cover, burning oil smell from the exhaust manifold, and oil pooling on the engine. The 1NZ-FE engine runs with tight valve cover bolt spacing—hardened or flattened gaskets are the primary leak point, especially on high-mileage Prius and Yaris models. This OEM-spec molded rubber gasket restores proper compression seal, eliminating oil loss and the fire risk from oil dripping onto a hot catalytic converter. No more topping off oil between changes.
• 1.5L 1NZ Engine Fitment – Direct-fit for Toyota and Scion 1.5L DOHC 16-valve 1NZ-FE and 1NZ-FXE engines. Compatible with 2001-2009 Prius, 2012-2019 Prius C, 2006-2019 Yaris, 2000-2005 Echo, 2004-2006 Scion xA, and 2004-2006 Scion xB. Pre-formed molded rubber gasket included. Full engine/VIN matrix in product description.
• Buyer's Checklist – Confirm: ① Your engine is a 1.5L DOHC 1NZ-FE or 1NZ-FXE—not the 1.8L 2ZR-FE used in later Prius and Corolla; ② Your vehicle is on the confirmed list. Check VIN 8th digit: B = 1.5L 1NZ-FXE (Prius, Prius C hybrid models), K = 1.5L 1NZ-FE (some Yaris, Echo), A = 1.5L 1NZ-FE (Yaris, xA, xB). Warning: 2010+ standard Prius uses the 1.8L 2ZR-FXE engine—this 1.5L gasket set will NOT fit. One VIN check avoids the wrong part.
• Installation Workflow – ① Allow engine to cool, disconnect battery. Remove engine cover, air intake ducting, and coil packs as needed. ② Disconnect PCV hose and any wire harness clips from valve cover. Remove valve cover bolts, lift off cover carefully. ③ Remove old gasket and clean sealing surfaces on both head and cover—use a plastic scraper, never gouge aluminum. ④ Place new Ortopia gasket into cover groove, ensuring it is fully seated. ⑤ Position cover on head, hand-start all bolts, torque criss-cross to 7 ft-lbs (10 Nm). ⑥ Reconnect components, start engine, check for leaks after warm-up.